When summer ends, most people switch off their coolers and store them until the next heatwave. However, storing this appliance without cleaning it may cause unpleasant odours, dust formation, and even the formation of fungi and mould during the storage period. So cleaning your cooler before winter keeps it in better condition and prepares it for the next summer.
In case you are wondering how to clean cooler parts at home properly, follow this simple guide.
Why Do You Need to Clean an Air Cooler Before Winter?
The air cooler is an appliance that works by circulating the air through water-soaked cooling pads. In this way, dust, mineral residues, and even stagnant water accumulate in the appliance. Using an air cooler cleaner can help remove these deposits. If these deposits are left unattended for some months, it can lead to odour problems and reduced cooling efficiency.
It will also give you time to check the pump, water tubes, and electrical parts before storing your air cooler.
How to Clean Your Air Cooler in 6 Steps
Step 1: Disconnect and Turn Off the Cooler
Turn off the device, unplug it, and empty the water tank. Do not clean the interior components when the device is still plugged into electricity.
Take the device to a place with plenty of ventilation so that water can be drained without damaging your floor or other furniture.
Step 2: Drain and Clean the Water Tank
If there is a drain plug, open it to drain all the water from the tank. Clean dirt and sediment in the tank by using mild soap and warm water along with a soft cloth or a sponge.
For removing mineral stains from the tank, use the manufacturer’s guidelines for cleaning. Do not use acids and harsh cleaners that may harm the tank and its seals.
Step 3: Take out the Cooling Pads for Inspection
To understand how to clean cooler cooling pads, remove them with reference to the appliance manual. Look for any excess dust, mineral deposits, damage or foul odour in the cooling pads. The plastic honeycomb cooling pads can be cleaned by washing with water. However, wood wool cooling pads require gentle handling.
If you are searching for how to clean an airpot, remember that an airpot is a different appliance and requires a separate cleaning method.
Step 4: Wipe the Fan Blades and Body
Clean the fan blades, protection grids, and the outer casing using a damp cloth. It may be necessary to use a soft brush to clean dust from inaccessible places.
Ensure that water does not get into the motor and other electrical parts of the cooler. It is necessary to leave electrical components hermetically sealed unless you are an electrician.
Step 5: Examine the Water Pump and Pipes
Examine water distribution pipes for any possible problems. Examine the water pump for any damage, but make sure it does not work while the cooler is empty and disassembled.
Check whether the pump works properly and makes no unusual sounds when operating the cooler in the next season.
Step 6: Dry and Reassemble All Parts Properly
Let the tank, removable pads, and all the accessible internal parts get fully dried. Presence of moisture in the cooler while it stays in storage for a prolonged period might lead to formation of mold and bad smell.
Re-assemble the appliance when all the parts get completely dried and correctly assembled. Keep it covered in breathable covers in dry place.
Maintenance Tasks Before Winter Air Cooler
Component | Task | Reason |
Water Tank | Draining, washing and rinsing | Elimination of stagnant water and sedimentation |
Cooling Pads | Cleaning and inspection for damage | Maintenance of airflow and water circulation |
Fan Blades and Grilles | Elimination of dust accumulation | Maintenance of unobstructed airflow |
Water Pump and Water Pipes | Inspection of accessible parts | Detection of damage and blockages |
Outer Body | Cleaning with a soft towel | Keeping the appliance clean during storage |
Electrical Connections | Checking for damage without disassembling the parts | Identifying when professional intervention is necessary |
All Parts | Drying and covering after cleaning | Prevention of moisture-related issues during storage |
Bottom Line
Cleaning your air cooler before winter helps prevent unpleasant odours, dust accumulation and moisture-related problems during storage. Follow these simple steps to keep your appliance clean and ready for the next summer season.
For any future purchase, consider brands from well-known Room Air Cooler Manufacturers like Hind Power. The brand offers a variety of coolers with different designs and cooling capacities for homes and businesses.
Frequently Asked Questions
Clean the water tank and check the cooling pads regularly during the summer season. Perform a complete cleaning before storing it for winter and ensure all parts are dry.
Although vinegar might be useful to remove some types of mineral deposits, it might affect some other materials and seals. You can use it only if the manufacturer allows this and according to its recommendation.
Drain the standing water, clean the tank and check the condition of the cooling pads, after which dry the parts completely. Replace the cooling pads if the smell persists despite cleaning.
If you refer to an insulated airpot for hot beverages, then it should be cleaned in accordance with its instructions. The cleaning process differs between an airpot and an air cooler.
Yes. It must be thoroughly washed and dried before covering it with a special breathable cover and placing it in a dry location.
No. It is forbidden to spray or pour water over the whole air cooler. Water could ruin the motor, switches and all electrical connections. Wash only the allowed parts.